Esperia Life 74 ALU

Eesperia Life 80

Naturo 65 ALU

Nature 68

Nature 68

A wooden window system with the smallest installation depth. Thanks to the use of the latest technologies, this product is characterized by high energy efficiency. This system is available in two versions: STANDARD and ALU.

68

depth [mm]

24-32

glass up to [mm]

3

laminated wood

4

layers of varnish

2

together

1.3

Your for Ug =1
(Ultimate spacer)

Cut design

Wood variants

Pine

Fir

Meranti

Oak

Wood variants

Pine

Fir

Meranti

Oak

Wood variants

Pine

Fir

Meranti

Oak

Wood variants

Pine

Fir

Meranti

Oak

Cut drawing

In the production of wooden windows and doors, the most commonly used is what is called glued laminated wood, made up of 3 or 4 layers. This solution:

  • increases the stability of the window or door;

  • prevents deformations caused by humidity;

  • allows the creation of windows with different shapes (arched, round).

There are two types of plywood available on the market: solid and with micro-joints.

Solid plywood (solid pine)

The solid plywood is mainly designed for windows and doors where light (transparent) coatings are used. The most important thing is that there are no joints in this plywood and the material is selected to obtain the largest possible sections of defect-free wood.

Laminated wood glued with micro-connectors (micro-pine)

For laminated glued wood with micro-joints, cut sections of solid wood are used. Only elements without natural defects are selected. One characteristic is a visible connection along the entire length through the so-called micro-cavities. Therefore, due to the lower aesthetic value, its surface is typically covered with opaque paints.

Cut drawing

In the production of wooden windows and doors, the most commonly used is what is called glued laminated wood, made up of 3 or 4 layers. This solution:

  • increases the stability of the window or door;

  • prevents deformations caused by humidity;

  • allows the creation of windows with different shapes (arched, round).

There are two types of plywood available on the market: solid and with micro-joints.

Solid plywood (solid pine)

The solid plywood is mainly designed for windows and doors where light (transparent) coatings are used. The most important thing is that there are no joints in this plywood and the material is selected to obtain the largest possible sections of defect-free wood.

Laminated wood glued with micro-connectors (micro-pine)

For laminated glued wood with micro-joints, cut sections of solid wood are used. Only elements without natural defects are selected. One characteristic is a visible connection along the entire length through the so-called micro-cavities. Therefore, due to the lower aesthetic value, its surface is typically covered with opaque paints.

Cut drawing

In the production of wooden windows and doors, the most commonly used is what is called glued laminated wood, made up of 3 or 4 layers. This solution:

  • increases the stability of the window or door;

  • prevents deformations caused by humidity;

  • allows the creation of windows with different shapes (arched, round).

There are two types of plywood available on the market: solid and with micro-joints.

Solid plywood (solid pine)

The solid plywood is mainly designed for windows and doors where light (transparent) coatings are used. The most important thing is that there are no joints in this plywood and the material is selected to obtain the largest possible sections of defect-free wood.

Laminated wood glued with micro-connectors (micro-pine)

For laminated glued wood with micro-joints, cut sections of solid wood are used. Only elements without natural defects are selected. One characteristic is a visible connection along the entire length through the so-called micro-cavities. Therefore, due to the lower aesthetic value, its surface is typically covered with opaque paints.

Cut drawing

In the production of wooden windows and doors, the most commonly used is what is called glued laminated wood, made up of 3 or 4 layers. This solution:

  • increases the stability of the window or door;

  • prevents deformations caused by humidity;

  • allows the creation of windows with different shapes (arched, round).

There are two types of plywood available on the market: solid and with micro-joints.

Solid plywood (solid pine)

The solid plywood is mainly designed for windows and doors where light (transparent) coatings are used. The most important thing is that there are no joints in this plywood and the material is selected to obtain the largest possible sections of defect-free wood.

Laminated wood glued with micro-connectors (micro-pine)

For laminated glued wood with micro-joints, cut sections of solid wood are used. Only elements without natural defects are selected. One characteristic is a visible connection along the entire length through the so-called micro-cavities. Therefore, due to the lower aesthetic value, its surface is typically covered with opaque paints.

Cores disponíveis

Cores disponíveis

Cores disponíveis

Cores disponíveis

Gallery

Specialist consultation

Do you still have doubts?

Maxiglass offers specialized advice by phone or on-site.

Specialist consultation

Do you still have doubts?

Maxiglass offers specialized advice by phone or on-site.

Specialist consultation

Do you still have doubts?

Maxiglass offers specialized advice by phone or on-site.

Specialist consultation

Do you still have doubts?

Maxiglass offers specialized advice by phone or on-site.

EN
EN
EN